NEC Electra Elite IPK II System - Page 484

Document Revision 4C Electra Elite IPK II
2 - 460 Flexible System Numbering
 11-16-06 Single Digit Service Code Setup – DND/Call Forward Override Bypass
Customize the 1-digit Service Code used for DND/Call Forward Override.
 11-16-07 Single Digit Service Code Setup – Message Waiting
(Default: 0).
 11-16-08 Single Digit Service Code Setup – Voice Over.
Service code used for the Voice Over feature (default: 6).
 11-16-09 Single Digit Service Code Setup – Access to Voice Mail
(Default: 8).
 11-16-10 Single Digit Service Code Setup – (Department) STG All Ring Mode
Assign the Single Digit (post-dialing) Service Code for All Member Ring.
 11-16-11 Single Digit Service Code Setup – Station Park Hold
Customize the one-digit service code used when placing a call in Personal Park (default: No
setting).
 11-20-01 Dial Extension Analyze Table – Dial Digits
Use tables 01 ~ 128 to assign the digits to be dialed using the Dial Extension Analyze Tables.
These tables are used when Program 11-01-01 is set to option 9 = Dial Extension Analyze. Up
to eight digits can be assigned and the valid entries are: (0, 1 ~ 9, #,
 )
 11-20-02 Dial Extension Analyze Table – Type of Dials
Assign the Type of Dial for the Extension Analyze Table from Program 11-20-01.
Operation
None