NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
IP Extenders/Mobile ConneX 2 - 529
Mobile ConneX users can access the following system features:
 Transfer Calls (##T)
 Place Calls on Hold (##H)
 Make Conference Calls (##C)
 Make Internal Calls ( + internal extension)
 Make Trunk Calls ( + 9+ number)
The following conditions apply for Mobile ConneX:
 Two IP Gateway ports are required.
 Channels 1&2, 3&4, 5&6, and 7&8 are married together for Mobile ConneX.
 Mobile ConneX can tell you when you have new voice mail. (Only when dialing into IVR).
 An e-mail can be sent when a voice mail is left.
 A user can call in and enable or disable the Mobile ConneX.
 A user can change the number for the Mobile ConneX to call.
 Mobile ConneX ports and Extended Extensions can be on the same Gateway unit.
Default Setting
Not set up at default
System Availability
Terminals
All multiline display terminals and DTH-4R-2
Required Software
Version 2000 or higher (Mobile ConneX)
Required Components:
 Digital Station Card (ESI, ESIB/E)

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English