NEC Electra Elite IPK II System - Page 571

Electra Elite IPK II Document Revision 4C
IP Station (MEGACO) – MG 16 2 - 547
 84-07-03 Firmware Download Setting – Login Name
Assign the user login name.
(Up to 24 characters)
 84-07-04 Firmware Download Setting – Password
Assign the password.
(Up to 24 characters)
IP Terminal Version Information defines the hardware and firmware version of the IP Terminal and
Adapter.
 90-22-01 Terminal Version Information – Hardware Version
Define the hardware of the IP Terminal.
(default: 00)
 90-22-02 Terminal Version Information – Firmware Version
Define the firmware of the IP Terminal.
(default: 00.00)
IP Phone Configuration
IP Telephone Terminal Basic Data Setup:
 15-01-01 Basic Extension Data Setup – Extension Name
Review the type protocol support by the IP phone.
(default: MEGACO)
 15-05-02 IP Telephone Terminal Basic Data Setup – IP Phone Fixed Port Assignment
Review the registered IP Phone Mac Address.
(default: 00-00-00-00-00-00)
 15-05-06 IP Telephone Terminal Basic Data Setup – IP Phone Terminal Type
Define the type of IP Phone being used – valid options are IP70, IP80 or IP Soft Phone.
(default: 0)
 15-05-07 IP Telephone Terminal Basic Data Setup – Using IP Address
Review the registered IP Phones IP Address (Informational Only).
(default: 0.0.0.0)
 15-05-15 IP Telephone Terminal Basic Data Setup – CODEC Type
Set the registered IP Phone Codec type – Reference PRG 84-11 Dterm IP Codec Basic
Information.
(default: Type:1).
IP Phone Information Basic Setup:
 84-03-06 IP Phone Information Basic Setup – Area Number
Set the country of origin.
(default: 1:USA).