Document Revision 4C Electra Elite IPK II
2 - 556 IP Station (MEGACO) – MG 16
The following menu items require programming in your IP Phone:
Program/
Item No.
Description/Selection Default Assigned Data Comments
1 Network Setting DHCP Disable
2 IP Address 0.0.0.0 Enter a Static IP Address for the IP
Phone.
3 Subnet Mask 0.0.0.0 Enter the subnet Mask Address.
4 Default Gateway 0.0.0.0 Enter your Default Gateway address.
5 Speed & Duplex Auto
6 MGC Address 0.0.0.0 Enter the Media Gateway Controller IP
Address.
When Multiple MG16 ETUs are entered
only the MG16 configured as MASTER in
Program 84-05-03 is set as MGC IP
Address.
7 EXT 0 Assign the IP Phones extension. This
information must match Program
11-02-01 Extension Numbering.
Extension must be manually defined.
Auto setting is not supported.
8 IP Address 0 Overriding an IP telephone must be
done through phone programming.
To Next Page
Loading...
