NEC Electra Elite IPK II System - Page 670

Document Revision 4C Electra Elite IPK II
2 - 646 ISDN Compatibility
 21-13-01 ISDN Calling Party Number Setup for Extensions
Assign each extension a Calling Party Number (maximum 16 digits per entry). The calling
number is the subscriber number of the dial-in number. When a call is made by an extension
which does not have an Extension Calling Number assigned (Program 21-12), the system sends
the calling number for the ISDN trunk defined in Program 21-13. If a Calling Party Number is
assigned in both PRG 21-12 and PRG 21-13, the system sends the data in PRG 21-13.
ISDN – PRI Network Specific Assignment
 26-02-07 Dial Analysis Table for ARS/LCR – Network Specified Parameter Table
Define the network specified parameter table for each ARS Table
Dial Analysis Table No.: 1 ~ 400
Table No.: 0 ~ 16 (0: no setting)
 26-12-01 Network Specified Parameter Table for ARS – Type of Number
Define the type of Number parameter for an ISDN outgoing call.
Table No.: 1 ~ 15
Type: 0 (System Default)
1 (Unknown)
2 (International Number)
3 (National Number)
4 (Network Specific Number)
5 (Subscriber Number)
6 (Abbreviated Number)
(default: 0 (All Tables)
 26-12-02 Network Specified Parameter Table for ARS – Numbering Plan Identification
Define the Numbering Plan Identification Parameter for an ISDN outgoing call
Table No.: 1 ~ 15
Type: 0 (System Default)
1 (Unknown)
2 (ISDN Numbering Plan)
3 (Data Numbering Plan)
4 (Telex Numbering Plan)
5 (National Standard Numbering Plan)
6 (Private Numbering Plan
(default: 0 (All Tables)
 44-05-11 ARS/F-Route Table – Network Specified Parameter Table
Define the network specified parameter table for each F-Route table.
F-Route Table No.: 1 ~ 500
Priority No.: 1 ~ 4
Table No.: 0 ~ 15 (0: no setting)
(default: 0 All Tables, All Orders)