NEC Electra Elite IPK II System - Page 708

Document Revision 4C Electra Elite IPK II
2 - 684 Line Preference
Default Setting
Enabled
System Availability
Terminals
Multiline Terminals
Required Component(s)
None
Related Features
Direct Inward LIne
Ring Groups
Trunk Groups
Programming
 14-05-01 Trunk Group – Trunk Group Number
For Auto-Answer of Non-Ringing Lines, assign trunks to trunk groups. This is part of Trunk
Group Routing programming.
Trunks: 1~100
 14-06-01 Trunk Group Routing – Priority Order Number
For Auto Answer of Non-Ringing Lines, program the Trunk Group Routing table. Auto Answer
uses this table to determine the answer sequence for ringing calls.
Trunk Groups: 1~100
 14-07-01 Trunk Access Map Setup
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, set up the Trunk Access
Maps.
Trunk Access Maps: 1~200