Electra Elite IPK II Document Revision 4C
Analog Communications Interface (ACI) 2 - 51
After you call an ACI software port:
If the port is set for input (Program 33-01-01=1) and a music source is connected, you hear music.
- OR -
If the port is set for output (Program 33-01-01=2) and External Paging is connected, you can page
into the external zone.
- OR -
If the port is set for output (Program 33-01-01=2) and a loud ringer is connected, you activate the
loud ringer.
To manually record a call an ACI software port:
1. While on a call, press the ACI Conversation Record key (PRG 15-07 or SC 751: 69 + 0).
The key LED is on when recording.
2. To stop recording, press the ACI Conversation Record key once again.
The key LED is off when recording has stopped.
To Next Page
Loading...
