NEC Electra Elite IPK II System - Page 763

Electra Elite IPK II Document Revision 4C
Music on Hold 2 - 739
 33-01-01 ACI Port Type Setup
Set each ACI software ports for input (1) or input/output (2). Use input ports for Music on Hold
sources. Use output ports for External Paging/Ringer Control.
ACI Ports: 1~96
(default: 2)
 33-02-01 ACI Department Calling Group
Assign ACI software ports to an ACI Department Group. This lets ACI callers connect to ACI
software ports by dialing the group pilot number (set in Program 11-08).
ACI Ports: 1~96
ACI Groups: 1~16
Priority: 1~96
 Refer to Analog Communications Interface (ACI) on page 2-45 for additional information.
(default: All ports assigned to Group 1; ports 01~96 have priority 01~96)
 80-01-64 Service Tone Setup – Music on Hold
Refer to Music on Hold on page 2-735.
 80-01-02 Service Tone Setup – Basic Tone Number
(Default: 0).
Refer to Table 2-27 Service Tone Setup, Program 80-01-02 on page 2-480.
Operation
None