NEC Electra Elite IPK II System - Page 771

Electra Elite IPK II Document Revision 4C
Night Service 2 - 747
Default Setting
System is always in Mode 1
System Availability
Terminals
Not Applicable
Required Component(s)
None
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Station Selection
Paging, External
Programmable Function Keys
Ring Groups
Programming
 10-05-01 General Purpose Relay Setup
 11-10-01 Service Code Setup (for System Administrator) – Night Mode Switching
Customize the service code (718) used for day/night mode switching.
 11-10-12 Service Code Setup (for System Administrator) – Night Mode Switching for Other Group
Customize the service code (618) used for Day/Night mode switching for another Night service
group.