EasyManua.ls Logo

NEC Electra Elite IPK II System - Page 772

NEC Electra Elite IPK II System
1190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Revision 4C Electra Elite IPK II
2 - 748 Night Service
11-12-43 Service Code Setup (for Service Access) – Answer No-Ring Line (Universal Answer)
Customize the service code (#0) used to manually answer a Universal Night Answer.
11-12-50 Service Code Setup (for Service Access) – General Purpose Relay
Define the service code used for turning the general purpose relay on and off (default = 780).
12-01-01 Night Mode Function Setup – Manual Night Mode Switching
Allow (1)/Prevent (0) any extensions from activating Manual Night Service.
12-01-02 Night Mode Function Setup – Automatic Night Mode Switching
Enable (1)/Disable (0) Automatic Night Service for the system. Make sure to set the Service
Patterns in PRG 12-02-01, PRG 12-02-02 and PRG 12-02-03.
12-02-01 Automatic Night Service – Start Time
For each Night Service Group, enter up to 20 start times for each Time Pattern (1~10).
The pattern first start time (Pattern 1) should begin at 00:00 (midnight).
12-02-02 Automatic Night Service – End Time
For each Night Service Group (01~32), enter up to 20 end times (0000~2359) for each Time
Pattern (1~10).
12-02-03 Automatic Night Service – Operation Mode
For each Night Service Group (01~32), define the Night Service Mode (1~8) for up to 20 start/
end times for each Time Pattern (1~10).
12-03-01 Weekly Night Service Switching
Assign one of the 10 Time Patterns programmed in PRG 12-02-01 to each day of the week.
12-04-01 Holiday Night Service Switching
Assign one of the 10 Time Patterns to holidays.
(default: No Setting)
12-05-01 Night Mode Group Assignment for Extensions
Assign a Day/Night Mode Group (01~32), for each extension.
(default: 1)
12-06-01 Night Mode Group Assignment for Trunks
Assign a Day/Night Mode Group (01~32), for each trunk port (1~200).
(default: 1)
12-07-01 Text Data for Night Mode
Create an original text message (up to 12 characters) which is displayed on an LCD of multiline
terminal in each Night Mode.
12-08-01 Night Mode Service Range
For each Night Mode Group (01~32), determine how many night modes (0~9) a user toggles
through when the Night Mode key is pressed.
(default: 2)
14-07-01 Trunk Access Map Setup
To allow for Universal Night Answer (UNA) answering, set up the Trunk Access Maps (1~200).
For UNA, extension must have incoming access to trunk ringing the External Paging speakers.

Table of Contents

Related product manuals