NEC Electra Elite IPK II System - Page 786

Document Revision 4C Electra Elite IPK II
2 - 762 One-Touch Calling
 The @ symbol can be entered in the dial string of a DSS/One Touch button. The @ applies
only to ISDN and Intercom calls. When using the @, the system waits for the destination to
answer (answer supervision), and then sends the rest of the digits.
 Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom
calls, or after the @ for ISDN calls.
Default Setting
None
System Availability
Terminals
All Multiline Terminals and DSS Consoles
Required Component(s)
None
Related Features
Programmable Function Keys
Transfer
Programming
 15-07-01 Programmable Function Keys
Define a Programmable Function Key for One-Touch Calling by defining the key as a DSS/
One-Touch key (01).
 30-03-01 DSS Console Key Assignment
Customize DSS Console keys to function as DSS keys, Service Code keys, Programmable
Function Keys, and One-Touch Calling keys.
 When programming a feature with a One-Touch Key, refer to the feature description for additional
programming options.