Document Revision 4C Electra Elite IPK II
2 - 770 Paging, External
DID and DIL trunks do not ring external page speakers. Only trunks defined as normal in
Program 22-02-01 ring external page speakers.
Paging keys can be assigned on Programmable Function Keys and Direct Station Selection
(DSS) Consoles to simplify External Paging operation.
If a PGD(2)-U10 ADP circuit has a Door Box connected, you cannot use that circuit for
External Paging.
To have outside calls ring External Paging Zones at night, refer to the Night Service feature
and Program 31-05.
The PGD(2)-U10 ADP can be connected only to an ESIB(8)-U20 ETU. if the PGD(2)-U10
ADP is connected to an ESIE(8)-U20 ETU, the PGD(2)-U10 ADP is NOT recognized.
When a ESIB(8)-U20 ETU has an ESIE(8)-U20 ETU installed [ESIB/E(16)], the
PGD(2)-U10 ADP has both channels available for Paging, MOH, External Ringers and
Door Box according to strapping on ports 1~8. The corresponding port on the ESIE(8)-U20
ETU do not support a station or other hardware (it is used by the PGD(2)-U10 ADP for
channel 2).
When a ESIB(8)-U20 ETU is installed without an ESIE(8)-U20 ETU installed, a
PGD(2)-U10 ADP installed on ports 1~8 is recognized, but only channel 1 on the
PGD(2)-U10 ADP is supported. Channel 2 is not available.
ESIB(8)-U10 ETUs and ESIE(8)-U10 ETUs do not support the PGD(2)-U10 ADP.
The maximum number of PGD(2)-U10 ADPs is 56. Refer to the Hardware Manual for more
information which describes how many of the 56 can be for paging, door box or Music on
Hold (MOH).
Phones that have an APR/APA installed do not pass voice to a trunk used for paging until
the interdigit time expires (Program 21-01-03).
Default Setting
No External Paging defined.
System Availability
Terminals
All Stations
To Next Page
Loading...
