NEC Electra Elite IPK II System - Page 795

Electra Elite IPK II Document Revision 4C
Paging, External 2 - 771
Required Component(s)
 ESIB(8)-U20 ETU for PGD(2)-U10 ADP
 ESIE(8)-U20 ETU for 2nd channel support
 PGD(2)-U10 ADP for Zone Paging
 1- or 2-way amplifier and speakers (locally provided)
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Station Selection
Door Box
Night Service
Paging, Internal
Programmable Function Keys
Transfer
Programming
 10-05-01 General Purpose Relay Setup
Define which relay circuits (5~8) on the PGD(2)-U10 ADP are used for General Purpose Relays.
 11-12-50 Service Code Setup (For Service Access) – General Purpose Relay
Specify the service code to be used for toggling the relay open and closed (default: 780).
 15-07-01 Programmable Function Keys
Assign function keys for External Paging zones (19 + zone) and External All Call Page (20). If
required, define a function key for a multiline terminal to use the general purpose relay (51).
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.