EasyManua.ls Logo

NEC Electra Elite IPK II System - Page 796

NEC Electra Elite IPK II System
1190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Revision 4C Electra Elite IPK II
2 - 772 Paging, External
20-13-29 Class of Service Options (Supplementary Service) – Paging Display
Turn Off (0) or On (1) an extension user ability to display incoming internal paging information.
(default: 1)
31-01-02 System Options for Internal/External Paging – Page Announcement Duration
Set the maximum allowable time (0~64800 seconds) for a Paging announcement. (default:
1200)
31-04-01 External Paging Zone Group
Assign each External Paging Speaker to an External Paging Group (0~8) used for accessing the
zone. If zones 1~8 are not connected to PGD(2)-U10 ADP, set these unused zones to External
Paging Group 0.
External Paging Speaker/Zones: 1~9
31-05-01 Universal Night Answer/Ring Over Page
Assign Universal Night Answer ringing (1)/ No ringing (0) to each External Paging zone. For
each trunk port, make a separate entry for each External Paging Zone (1~9). (default: 1200)
31-06-01 External Speaker Control – Broadcast Splash Tone before Paging (Paging Start Tone)
Enable Splash Tone (1) or Chime Tone (2)/Disable both (0) for each External Speaker Number
(1~9). (default: 2)
31-06-02 External Speaker Control – Broadcast Splash Tone after Paging (Paging End Time)
Enable Splash Tone (1) or Chime Tone (2)/Disable both (0) for each External Speaker Number
(1~9). (default: 2)
31-06-04 External Speaker Control – CODEC Transmit Gain Setup
31-06-05 External Speaker Control – CODEC Receive Gain Setup
Select the CODEC gain types (1~32) for each External Speaker (1~9).
(default: 32)
31-07-01 Combined Paging Assignments
Assign an External Paging Group (0~8) to an Internal Paging Zone (0 = All Call, Zones 1~64) for
Combined Paging. When an extension user makes a Combined Page, they simultaneously
broadcast into both the External and Internal Zone. (default: 1).
31-08-01 BGM on External Paging – BGM
Enable (1)/Disable (0) the Background Music option for each External Paging Zone (1~9). If set
to 1, the system plays Background Music over the zone when it is idle. (default: 0)
Operation
To Page into an external zone:
1. Press External Paging key (PRG 15-07 or SC 751: 19 for External Paging zones or 20 for External
All Call Paging).
2. Make announcement.

Table of Contents

Related product manuals