NEC Electra Elite IPK II System - Page 804

Document Revision 4C Electra Elite IPK II
2 - 780 Park
 When the terminal that has a call in Personal Park is unplugged, the Personal Park is
released and the held caller is placed on Non-Exclusive Hold.
 The following table indicates what condition the service codes and Programmable Function
key can be used.
 A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program
20-09-02.
 Park keys can be assigned on DSS consoles.
 Calls on virtual extension keys cannot be put in Personal Park if program 15-18-01 is set to
Land on the key (1).
 Function keys simplify Park operation.
 Calls on Virtual Extension keys cannot be Call Parked.
 One Touch keys programmed for Park Hold Service Code cannot be used to park calls
without first using Hold or Transfer.
 Call Park – Step Call is supported in the local system only.
 Program 20-11-27: Class of Service Options (Hold/Transfer Service) – Call Park
Automatically Searched is not supported in Version 1600.
Default Setting
Enabled
Status
Using 3-Digit
Service Code
Using 1-Digit
Service Code
Using
Personal
Park Key
Speaking Not Available Not Available Available
ICM Dial Tone or Busy Tone Available Not Available Available
Calling Another Extension Not Available Available
(with outside call
on hold – when
called extension
does not answer)
Available
Receiving a Personal Park Recall Not Available Not Available Available