NEC Electra Elite IPK II System - Page 805

Electra Elite IPK II Document Revision 4C
Park 2 - 781
System Availability
Terminals
Al Terminals
Required Component(s)
None
Related Features
Caller ID
Call Arrival (CAR) Keys
Direct Station Selection
Hold
Programmable Function Keys
Programming
 11-12-31 Service Code Setup (for Service Access) – Park Hold
Set the service code which should be used for placing a call in Park (default: #6).
 11-12-32 Service Code Setup (for Service Access) – Answer for Park Hold
Set the service code which should be used for answering a call in Park (default:
6).
 11-12-35 Service Code Setup (for Service Access) – Station Park Hold
Set the service code to be used for placing a call in a Personal Park (default: 757).
 11-16-11 Single Digit Service Code Setup – Station Park Hold
Customize the one-digit service code to be used when placing a call in Personal Park (default:
No setting).
 15-02-08 Multiline Telephone Basic Data setup – Automatic Handsfree
Set whether pressing a key accesses a One-Touch key (1) or Preselects the key (0). (default: 1)
 15-07-01 Programmable Function Keys
Assign a key as a Park Orbit key (code
04 plus Park orbit number [01~64]) or as a Personal