NEC Electra Elite IPK II System - Page 807

Electra Elite IPK II Document Revision 4C
Park 2 - 783
3. Press Speaker to hang up.
 If not picked up, the call recalls to you.
- OR -
1. At the multiline terminal or 2-button telephone, press Hold.
- OR -
At a 500/2500 single line telephone, hookflash.
2. Dial
#6 and the Park orbit (01~64).
 If you hear busy tone, the orbit is busy. Try another orbit.
 With Version 2000 or higher, if you hear a busy tone, the orbit is busy. Dial #6 if enabled in PRG 20-11-27
(Call Park AutoSearching) to search for an idle park location in ascending order.
3. Use Paging to announce the call.
4. Press Speaker to hang up.
 If not picked up, the call recalls to you.
 The parked call recalls after the Park Hold Time (Program 24-01-06). The call rings the extension to which it
recalled for the Hold Recall Callback Time (Program 24-01-02). The call then goes on Hold for the Park Hold
Time, then recalls again for the Hold Recall Callback Time. The call continues to cycle between Hold and recall
until the extension user answers the call or the outside party hangs up.
To pick up a parked call:
1. Lift the handset.
2. Press the Park key (PRG 15-07 or SC 752:
04 + orbit).
- OR -
1. At the multiline terminal or 2-button telephone, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial
6 and the Park orbit (01~64).
To park a call at your extension:
1. Do not hang up.