NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 788 PBX Compatibility
 Except for dialing the PBX access code, users place calls on PBX trunks just like other
trunks. All relevant access programming applies. Refer to the Central Office Calls, Placing
on page 2-195 feature for more details.
 You can have DILs route from the connected PBX. Users can access these trunks for
outgoing PBX calls. All PBX Compatibility restrictions and programming apply.
 Flash may allow access to certain PBX features – like Transfer. Make sure you program
Flash for compatibility with the connected PBX.
 The system does not provide automatic Pulse to Tone Conversion after outdialing the PBX
trunk access code.
 You can program incoming DISA trunks to be outgoing PBX trunks. All PBX Compatibility
restrictions and programming apply.
 PBX trunks can follow normal system Toll Restriction.
 Users can get outbound access to PBX trunks through Trunk Groups and/or Trunk Group
Routing. All PBX Compatibility restrictions and programming apply.
 If the system routes a call to a PBX trunk, it does not automatically insert the PBX access
code. It outdials the call just as the user dialed it.
Default Setting
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English