NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
PBX Compatibility 2 - 789
Related Features
Account Code Entry
Call Forwarding – Centrex
Central Office Calls, Answering
Central Office Calls, Placing
Code Restriction
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Flash
Pulse to Tone Conversion
Ring Groups
Speed Dial – System/Group/Station
Trunk Group Routing
Trunk Groups
Programming
 14-01-01 Basic Trunk Data Setup – Trunk Name
Set the names for trunks. The trunk name displays at display multiline terminals for incoming
and outgoing calls. Up to 12 characters are allowed.
 14-01-02 Basic Trunk Data Setup – Transmit Level
Set these options for compatibility with the connected PBX.
 14-01-08 Basic Trunk Data Setup – Toll Restriction
For each PBX trunk port, Enable (0)/Disable (1) Toll Restriction.
 14-02-01 Analog Trunk Data Setup – Signaling Type (DP/DTMF)
 14-02-02 Analog Trunk Data Setup – Ring Detect Type

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English