Document Revision 4C Electra Elite IPK II
2 - 808 Prime Line Selection
System Availability
Terminals
Any Station
Required Component(s)
None
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Line Preference
Programming
14-05-01 Trunk Group – Trunk Group Number
Assign Prime Line to a separate trunk group for outgoing Prime Line selection. (Also refer to
PRG 14-06 and PRG 21-02.)
14-06-01 Trunk Group Routing – Priority Order Number
Set up outbound route for trunk group that contains the Prime Line. (Also refer to PRG 14-05
and PRG 21-02.)
Trunk Group Routing: 1~100
14-07-01 Trunk Access Map Setup – Trunk Port Number
For outgoing Prime Line selection, assign each Prime Line trunk to a different Access Map and
deny outbound access to all trunks except the Prime Line trunk.
Trunks: 1~200
15-01-02 Basic Extension Data Setup – Outgoing Trunk Line Preference
Enter 1 for this option so extension user seizes Prime Line when they lift the handset.
To Next Page
Loading...
