Document Revision 4C Electra Elite IPK II
2 - 818 Programmable Function Keys
Operation
To change a 2-digit programmable key:
1. Press Speaker.
2. Dial 751 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold.
For available functions codes refer to PRG 15-07 in the Electra Elite IPK II Programing Manual.
To undefine a key, enter 00.
To change a 3-digit programmable key:
1. Press Speaker.
2. Dial 752 for 3-digit codes.
3. Press the key you want to program.
4. Enter the 3-digit key function and any additional information needed for the key.
For available functions codes, refer to PRG 15-07 in the Electra Elite IPK II Programing Manual.
To undefine a key, enter 000.
When a key is programmed using service code 752, that key cannot be programmed with a function using the 751
code until the key is undefined (000). For example with a Park Key programmed by dialing 752 +
04 must be
undefined by dialing 000 before it can be programmed as a Voice Over key by dialing 751 + 48.
To check the function of a programmable key:
1. Press the Help key.
2. Press the programmable key.
The programmed function displays.
To Next Page
Loading...
Need help?
General
