NEC Electra Elite IPK II System - Page 856

Document Revision 4C Electra Elite IPK II
2 - 832 Remote (System) Upgrade
Default Setting
At default, both PCPro and WebPro are set to Update Immediately after the upload.
System Availability
Terminals
Not applicable
Required Component(s)
PCPro or WebPro
Related Features
PC Programming
Programming
Refer to PC Programming on page 2-793.
Operation
PCPro
1. Obtain the firmware package file from NEC.
2. Open and login to PCPro.
3. Connect to the switch.
4. Under the Communications menu, choose the Firmware Update option.
5. In the firmware update window, browse to the location of the Firmware Package file. For example,
the file name might be MainSWv0.36.pkg.