NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Remote (System) Upgrade 2 - 833
6. Select the schedule type:
 Immediately after upload
 At the time…
 If you choose At the time…, select the date and time you want the CPUII to reset and switch over to the new
software version.
7. Click Start. PCPro uploads the firmware package file, and updates the system at the time you
specified in step 6.
WebPro
1. Obtain the firmware package file from NEC.
2. Open Internet Explorer and connect to the following URL where xxx.xxx.xxx.xxx is the IP address
of the CPU.
http://xxx.xxx.xxx.xxx
3. Login to WebPro with a username and password defined in PRG 90-02.
4. In the Administration section of the Home page, select the Firmware Upgrade Icon.
5. On the Firmware Update page, browse to the location of the firmware upgrade package file. For
example, the file name might be MainSWv0.36.pkg.
6. Select the schedule type:
 Immediately after upload.
 At the time…
 If you choose At the time…, select the date and time you want the CPU to reset and switch over to the new
software version.
7. Click Start. WebPro uploads the firmware package file, and updates the system at the time you
specified in step 6.
For additional information, refer to the Electra Elite IPK II PC Programming Manual.

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English