Electra Elite IPK II Document Revision 4C
Ring Groups 2 - 847
 22-02-01 Incoming Call Trunk Setup
Assign the incoming trunk type (0) for each trunk. There is one item for each Night Service
Mode.
 This option must be set to 0 for Ring Groups to work.
Night Service Time Mode: 1~8
 22-04-01 Incoming Extension Ring Group Assignment
Assign extensions to ring groups.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
 22-05-01 Incoming Trunk Ring Group Assignment
Assign trunks to ring groups.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
(default: 1)
 22-08-01 DIL/IRG No Answer Destination
For DIL Delayed Ringing, assign the DIL No Answer Ring Group. An unanswered DIL rings this
group after the DIL No Answer Time (Program 22-01-04) expires. DIL Delayed Ringing can also
reroute outside calls ringing a Ring Group In-Skin/External Voice Mail, or Centralized Voice Mail.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
(default: 1)
 22-12-01 DID Intercept Ring Group (Version 1600 or higher required)
For each DID Translation Table, assign the destination for DID Intercept. The destination can be
a Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. For each table, make a
separate entry for each Night Service mode.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
(default: 1)
 25-03-01 VRS/DISA Transfer Ring Group With Incorrect Dialing
Set the transfer destination for each DISA and Automated Attendant (OPA) trunk. The
destination can be a Ring Group or Voice Mail. Make a separate entry for each Night Service
mode.
Ring Groups: 1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
(default: 0)
 For incoming calls, Ring Group programming (PRG 22-04/PRG 22-05) overrides Access Map
programming (PRG 14-07/PRG 15-06).
To Next Page
Loading...
Need help?
General
