NEC Electra Elite IPK II System - Page 872

Document Revision 4C Electra Elite IPK II
2 - 848 Ring Groups
Use the charts below to program the following example:
Operation
Refer to Central Office Calls, Answering on page 2-187.
For this extension . . .
1
301 Trunk 1 Rings Trunk 2 Flashes Trunk 3 Flashes
302 Trunk 1 Flashes Trunk 2 Rings Trunk 3 Flashes
303 Trunk 1 Flashes Trunk 2 Flashes Trunk 3 Rings
1
Trunks ring the same in the day as at night.
Program 22-04 : Incoming Extension Ring Group Assignment
Ring Group
1
>
123
Trunk 1 X- -
Trunk 2 -X-
Trunk 3 --X
X = Trunk assigned to indicated Ring Group
1
Make the same PRG 22-04 entry for all Night Service modes.
Program 22-05 : Incoming Trunk Ring Group Assignment
Ring Group
>
123
Ext. 301 1
0
1
0
1
Ext. 302
0
1
1
0
1
Ext. 303
0
1
0
1
1
1 = Extension rings
0 = Extension does not ring
1
To allow extension user to answer flashing line, be sure to give extension
incoming access to the trunk in PRG 14-07 and PRG 15-06.