Electra Elite IPK II Document Revision 4C
Speed Dial – System/Group/Station 2 - 901
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Account Code Entry
Automatic Route Selection
Central Office Calls, Placing
Code Restriction
Dial Tone Detection
One-Touch Calling
PBX Compatibility
Programmable Function Keys
Single Line Telephones, Analog 500/2500 Sets
Trunk Group Routing
Programming
10-09-01 DTMF and Dial Tone Circuit Setup
If dial tone detection is enabled, be sure to allocate at least one circuit for dial tone detection
(Type 0 or 2).
11-12-10 Service Code Setup (for Service Access) – Station Speed Dialing
Assign Service code for accessing System Speed Dial bins (default #2).
To Next Page
Loading...
