NEC Electra Elite IPK II System - Page 996

Document Revision 4C Electra Elite IPK II
2 - 972 Tone Override
Programming
 11-12-03 Service Code Setup (for Service Access) – Override (Off-Hook Signaling)
Assign the service code used for Off-Hook Signaling Override.
(default: 709)
 11-16-04 Single Digit Service Code Setup – Intercom Off-Hook Signaling
Assign a one-digit service code used for Off-Hook Signaling.
(default:
)
 15-02-12 Multiline Telephone Basic Data Setup – Off-Hook Ringing
For each extension, set Off-Hook Ringing type: 0 (Muted), 1 (None), 3 (Beep in Speaker), 4
(Beep in Handset), 5 (Beep in Handset and Speaker).
(default: 5)
 15-07-01 Programmable Function Keys
Assign a function key for Off-Hook Signaling (code 33).
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-09-01 Class of Service Options (Incoming Call Service) – Second Call for DID/DISA/DIL/E&M
Override
Enable (1)/Disable (0) an extension ability to receive a second call from a DID, DISA, DIL, or Tie
Line caller.
(default: 1)
 20-09-07 Class of Service Options (Incoming Call Service) – Call Queuing
For each extension Disable (0)/Enable (1) the extension user ability to have multiple calls
queued at the extension. If Allowed, Tone Override is automatic. Refer to PRG 20-13-06.
(default: 1)
 20-13-05 Class of Service Options (Supplementary Service) – Intercom Off-Hook Signaling
Enable (1)/Disable (0) the ability to receive Off-Hook Signaling.
 20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Enable (1)/Disable (0) the ability to automatically send Off-Hook Signals while busy on a
handset call. Used when PRG 20-09-07 is set to disable (0).
(default: 0)
 20-13-34 Class of Service Options (Supplementary Service) – Block Manual Off-Hook Signaling
Turn off (0) or on (1) an extension ability to block Off-Hook signals manually sent from a
co-worker.
(default: 0)
 20-13-35 Class of Service Options (Supplementary Service) – Block Camp On
Enable (1)/Disable (0) the extension user ability to block callers from dialing (default #) to Camp
On.
(default: 0)