NEC Electra Elite IPK II System - Page 997

Electra Elite IPK II Document Revision 4C
Tone Override 2 - 973
 20-18-06 Service Tone Timers – Interval of Call Waiting Tone
Use this timer (0~64800 seconds) to set the time between Off-Hook Signaling alerts.
(default: 10)
 80-01-02 Service Tone Setup – Basic Tone Number
(Default: 0).
Refer to Table 2-27 Service Tone Setup, Program 80-01-02 on page 2-480 (Service Tone #1).
 80-01-01 Service Tone Setup – Ring Busy Tone
Define Ring Busy Tone.
Refer to Table 2-26 Service Tone Setup, Program 80-01-01 on page 2-476 (Service Tone #39).
Operation
To send Off-Hook signals to an extension busy on a call:

Your extension may send Off-Hook signals automatically.
1. Dial  (PRG11-16-04).
- OR -
Dial 709 (PRG 11-12-02).
- OR -
Press the Off-Hook Signaling key (PRG 15-07-01 code 33).
 You hear Ring Busy Tone.
 The called extension hears Call Alert Notification.
To answer Tone Override:
1. Receive Tone Override.
2. Press Hold and talk with the party.