4 - 52 Chapter 4
Chapter 4 - Terminals and Optional Equipment
4.15.5 Bluetooth Cordless Handset (BCH) Interface - P/N 0910092
This optional interface provides the keyset user the option to use Bluetooth technology to provide a cordless
handset. Bluetooth headset connectivity is also supported. This handset/cradle combination provides:
● Keyset-like Handset
● 8 Line Buttons
● Function Button
● Dial Button
● Display
● Cradle Charges Handset
● Base Side RF Block (50 meters, Class 1)
● Bluetooth Distance (line of site between cradle and Bluetooth Handset):
Class 1: 50 Meters
Class 2: 10 Meters
● Headset Connectivity Supported
Up to 16 devices can be installed within a 100m (open area, ex: outdoors) or 50m (confined/blocked area,
ex: indoors) radius and each device is located within a distance of 1 meter between each device
simultaneously. This maximum can be affected by the installation environment.
This adapter uses both the Handset Device and Bottom Slot connectors (preventing other adapters - such
as ADA, APR, and PSA - from being used on the same keyset).
The BCH and a Bluetooth headset cannot be used at the same time. However, a headset can be paired with
the handset cradle and it an be used instead of the handset.
When charging the BCH, the following LEDs provide indications of the status:
The BCH will retain call histories for up to 10 incoming calls.
Note that the handset and cradle are paired by default - there is no need to manually pair the devices upon
the initial installation.
On-Hook Charging:
Red = Charging Green = Charging
Complete
Flashing Red =
Incoming Call
Off-Hook (Idle):
No LED = Idle Flashing Red =
Incoming Call
● The Bluetooth Cordless Handset will not work on Aspire keysets.
● A terminal with the Bluetooth handset installed cannot use the Group
Listen feature,- however, two-way speakerphone is still available.
To Next Page
Loading...
Need help?
General