1 - 26 Chapter 1
Chapter 1 - Installing the Chassis
4. Remove the two screws from the metal retaining bracket and remove the bracket.
● This allows access to three battery compartments.
5. Pull out the first battery compartment using the tab on the front of the tray. Loosen the two
screws on the top of the cover and remove.
6. Remove the two screws holding in the metal retaining bracket and remove the bracket.
7. Install two of the batteries into the compartment and reattach the metal retaining bracket.
Figure 1-33: REMOVE RETAINING BRACKET AND BATTERY TRAYS
Figure 1-34: REMOVE BATTERY TRAY COVER AND RETAINING BRACKET
To Next Page
Loading...
