Chapter 1 - Installing the Chassis
Chapter 1 1 - 27
8. Connect the battery cables provided with the battery box as shown below. The black cable is
attached to the negative connector on the right-side battery. The blue cable is attached from
the positive connector on the right-side battery to the negative connector on the left-side
battery. The red cable is attached from the positve connector of the left-side battery.
9. Route the cables out of the battery box, securing them into the grooves in the tray
10. Replace the cover and reattach the two screws.
11. Repeat steps 5-10 for the remaining battery compartments.
12. Reinstall the metal retaining bracket removed in step 4 and secure with the 2 screws.
Figure 1-35: CONNECT THE POLARITY-SENSITIVE BATTERY CABLES
Figure 1-36: ROUTE BATTERY CABLES AND REPLACE COVER
! Important !
● Be sure to connect the cables as shown. If the polarity connection of
the cables is incorrect, it can cause the fuses in the battery box to blow, or
it may also cause a fire.
To Next Page
Loading...
