EXAMPLE 2ZA? | read amplifier I/O configuration of axis # 2
123H | controller returns a value of 123H for axis #2
| 123H = (0001 0010 0011)Binary
| Bits 0, 1, 5, 8 = 1. All other bits = 0
| Bits 0, 2, 5, 8 = 1. All other bits = 0
2ZA 125H | set amplifier I/O configuration to 125H for axis #2
| 125H = (0001 0010 0101)Binary
SM | save all controller settings to non-volatile memory
Please refer the table above to interpret the affect of these bit values.
3-160 Section 3 – Remote Mode
To Next Page
Loading...
