7.1.1 Description of Keys (see Figure 7.1)
STOP ALL
When this button is activated, all motion is aborted. All axes are
affected. The function of STOP ALL on the keypad is equivalent to
STOP ALL on the ESP300 front panel.
MACRO#
Activating either MACRO # button results in execution of a
previously stored program.
MACRO 3 runs PROGRAM 3
See
EP command in Section 3, Remote Mode, for details on creating
programs.
SHIFT ↑
Pressing this key in connection with a double function key selects the
upper symbol, e.g. /
F (this symbol is selected).
When this key is pressed, all previously typed characters are sent to
the ESP300.
SPACE BKSP
7.1.2 Activating the Keypad
Plug one end of the cable that was supplied with the keypad into the
receptacle on the bottom side of the keypad and the other end into the
receptacle on the lower right corner of the ESP300 front panel. The
ESP300 will detect the presence of the keypad. No user settings are
required.
Now, the keypad is ready for use. An easy way to verify proper
operation of the keypad is by sending the
VE command (type: VE
and hit ENTER). The ESP300 should respond with the current
version.
MACRO 1 runs PROGRAM 1
MACRO 4 runs PROGRAM 4
MACRO 2 runs PROGRAM 2
↵ ENTER
Pressing this key deletes a preceding character. Pressing it in
connection with the SHIFT key inserts a space in a given line.
7-2 Section 7 – Optional Equipment
To Next Page
Loading...
Need help?
General
