Appendix B – Trouble-Shooting /
Maintenance
There are no user-serviceable parts or user adjustments to be made to
the ESP300 controller/driver.
WARNING
• Turn off power switch and unplug the unit from its power
source
• Disconnect cables if their function is not understood
• Remove jewelry from hands and wrist
CAUTION
Verify proper alignment before inserting connectors.
Procedures are to be performed only by qualified service
personnel. Qualified service personnel should be aware of the
shock hazards involved when instrument covers are removed and
should observe the following precautions before proceeding.
• Expect hazardous voltages to be present in any unknown
circuits.
Refer to Appendix G, Factory Service, for information about repair or
other hardware corrective action.
Appendix B – Trouble-Shooting and Maintenance B-1