149
Shooting Settings
A
3D-Tracking
When [3D-tracking] is selected for AF-area mode, the camera stores the
colors in the area surrounding the focus point at the moment the shutter-
release button is pressed halfway. Consequently 3D-tracking may not
produce the desired results with subjects that are similar in color to the
background or that occupy a very small area of the frame.
A
Quick Focus-Point Selection
For quicker focus-point selection, choose [Every other point] for Custom
Setting a6 [Focus points used] to use only a quarter of the available focus
points.
A
AF-S/AF-I Teleconverters
If [3D-tracking] or [Auto-area AF] is selected for AF-area mode when an
AF-S/AF-I teleconverter is used, [Single-point AF] will automatically be
selected at combined apertures slower than f/5.6.
To Next Page
Loading...
