238
Shooting Settings
ADL Bracketing
The camera varies Active D-Lighting over a series of exposures.
To use ADL bracketing:
1
Choose the number of shots.
•
Pressing the BKT button, rotate the main command dial to
choose the number of shots in the bracketing sequence.
•
At settings other than zero, a
M
icon and an ADL
bracketing indicator appear in the control panel and BKT
will be displayed in the viewfinder.
•
Choose two shots to take one photograph with Active
D-Lighting off and another at a selected value. Choose
three to five shots to take a series of photographs with
Active D-Lighting set to [Off], [Low], and [Normal] (three
shots), [Off], [Low], [Normal], and [High] (four shots), or
[Off], [Low], [Normal], [High], and [Extra high] (five shots).
If you choose more than two shots, proceed to Step 3.
To Next Page
Loading...
