245
Shooting Settings
Modifying Picture Controls
Picture Controls can be modified to suit the scene or the
photographer’s creative intent.
1
Select a Picture Control.
Highlight the desired Picture Control
in the Picture Control list and press
2
.
2
Adjust settings.
Press
1
or
3
to highlight the desired
setting (
0
247) and press
4
or
2
to
choose a value in increments of 1, or
rotate the sub-command dial to
choose a value in increments of 0.25
(the options available vary with the Picture Control
selected). To quickly adjust levels for balanced
[Sharpening], [Mid-range sharpening], and [Clarity],
highlight [Quick sharp] and press
4
or
2
. Repeat this step
until all settings have been adjusted. Default settings can be
restored by pressing the
O
(
Q
) button.
To Next Page
Loading...
