451
Network Connections
Disconnecting and Reconnecting
The camera’s link to an existing network can be suspended or
resumed as described below.
❚❚
Disconnecting
You can disconnect by turning the camera off, selecting
[Disable] for [Connect to PC]> [Wi-Fi connection] in the setup
menu, or selecting [Wi-Fi connection]> [Close Wi-Fi
connection] in the still-photography
i
menu. The connection
to the computer will also end if you use Wi-Fi or Bluetooth to
connect to a smart device.
D
Access-Point Mode
An error will occur if the computer’s wireless connection is disabled
before the camera’s. Disable camera Wi-Fi first.
To Next Page
Loading...
