297
Other Shooting Options
Ending Multiple Exposures
To end a multiple exposure before the
specified number of exposures have
been taken, select [Off] for multiple
exposure mode or press the
K
button
followed by the
i
button and select
either [Save and exit] or [Discard and
exit]. If shooting ends or you select [Save and exit] before the
specified number of exposures have been taken, a multiple
exposure will be created from the exposures that have been
recorded to that point. If [Average] is selected for [Overlay
mode], gain will be adjusted to reflect the number of exposures
actually recorded. Note that shooting will end automatically if:
•
A two-button reset is performed
•
The camera is turned off
•
The battery is exhausted
To Next Page
Loading...
