325
Other Shooting Options
D
Time-Lapse Movies
•
Sound is not recorded with time-lapse movies.
•
The shutter speed and the time needed to record the image to the
memory card may vary from shot to shot. As a result, the interval
between a shot being recorded and the start of the next shot may vary.
•
Shooting will not begin if a time-lapse movie cannot be recorded at
current settings, for example if:
- The value selected for [Interval] is longer than that selected for
[Shooting time]
-[00:00'00"] is selected for [Interval] or [Shooting time]
- The memory card is full
•
The
K
button cannot be used to view pictures while time-lapse
recording is in progress.
•
For consistent coloration, choose a white balance setting other than
4
([Auto]) or
D
([Natural light auto]) when recording time-lapse
movies.
•
Regardless of the option selected for Custom Setting c2 [Standby
timer], the standby timer will not expire while recording is in progress.
•
Shooting may end if camera controls are used or settings are changed
or HDMI cable is connected. A movie will be created from the frames
shot to the point where shooting ended.
•
The following end shooting without a beep sounding or a movie being
recorded:
- Disconnecting the power source
- Ejecting the memory card
To Next Page
Loading...
