443
Network Connections
6
Obtain or select an IP address.
•
Highlight one of the following
options and press
J
.
-[Obtain automatically]: Select
this option if the network is
configured to supply the IP
address automatically.
-[Enter manually]: Press
J
; a dialog will be displayed
where you can manually enter an IP address. Rotate the
main command dial to highlight segments, press
4
or
2
to change, and press
J
to accept. Press
X
(
T
) to exit
to the “IP address configuration complete” dialog when
entry is complete. Pressing
X
(
T
) again displays the
sub-net mask, which you can edit by pressing
1
and
3
,
pressing
J
to exit when entry is complete.
•
Confirm the IP address and press
J
to proceed.
7
Launch the Wireless
Transmitter Utility.
When prompted, launch the Wireless
Transmitter Utility on the computer.
To Next Page
Loading...
