497
Remote Flash Photography
3
C
: Adjust flash settings.
•
Choose the flash control mode and
flash level for the master flash and
the flash units in each group:
•
Choose a channel for the master
flash. If the remote flash units
include an SB-500, you must choose
channel 3, but otherwise you can
choose any channel between 1 and
4.
4
f
: Set the remote flash units to the same channel
as the master flash.
Set the remote flash units to the channel selected in Step 3.
Option Description
TTL i-TTL flash control.
q
A
Auto aperture (available only with compatible flash
units).
M Choose the flash level manually.
–– (off)
The units do not fire and the flash level cannot be
adjusted.
To Next Page
Loading...
