680
Menu Guide >
B
The Setup Menu
1
Select [Pixel mapping] in the setup menu.
Turn the camera on, press the
G
button, and select [Pixel
mapping] in the setup menu.
2
Select [Start].
Pixel mapping will start.
1
appears in the control panel
while the operation is in progress.
3
Turn the camera off when pixel mapping is
complete.
D
Pixel Mapping
•
Do not attempt to operate the camera while pixel mapping is in
progress. Do not turn the camera off or remove or disconnect the power
source.
•
Pixel mapping may not be available if the camera’s internal temperature
is elevated.
To Next Page
Loading...
