697
Menu Guide >
B
The Setup Menu
[Wireless]
Infrastructure connections: Adjust settings to match
those used on the network.
•
[SSID]: Enter the network SSID.
•
[Channel]: The channel is selected automatically.
•
[Authentication/encryption]: Choose from [OPEN]
and [WPA2-PSK-AES].
•
[Password]: Enter the network password.
Ad-hoc connections: Choose the settings used for
connection to the camera.
•
[SSID]: Enter the camera SSID.
•
[Channel]: Select [Auto] for automatic channel
selection or [Manual] to choose the channel manually.
•
[Authentication/encryption]: Choose from [OPEN]
and [WPA2-PSK-AES].
•
[Password]: Choose the password used for connection
to the camera when [WPA2-PSK-AES] is selected for
[Authentication/encryption].
[TCP/IP]
Enter TCP/IP information for infrastructure connections.
An IP address is required.
•
If [Enable] is selected for [Obtain automatically], the
IP address and sub-net mask will be acquired via a
DHCP server or automatic IP addressing.
•
Select [Disable] manually to enter the IP address
([Address]) and sub-net mask ([Mask]).
Option Description
To Next Page
Loading...
