791
Technical Notes
1 Single-point AF is used when 3D-tracking or auto-area AF is selected
forAF-area mode.
2 Autofocus not available.
3 Focus data for focus points other than the center focus point are
obtained from line sensors.
•
Autofocus is not available when teleconverters are used with the AF-S
VR Micro-Nikkor 105mm f/2.8G IF-ED.
A
Recognizing CPU and Type G, E, and D Lenses
CPU lenses can be identified by the presence of CPU contacts (
q
). Type G
lenses are marked with a “G”, type E lenses with an “E”, and type D lenses
with a “D”. Type G and E lenses are not equipped with a lens aperture ring
(
w
).
CPU lens Type G or E lens Type D lens
To Next Page
Loading...
