Nokia 7705 SAR - Page 811

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 811
3.14.2.1.9 Show Multilink Bundle and IMA Group Commands
multilink-bundle
Syntax multilink-bundle [bundle-id | slot/mda | type {mlppp | ima-grp}] [detail]
multilink-bundle [{bundle-id | slot/mda} | [ppp [multiclass] | ima]]
Context show
Description This command displays multilink bundle information. An operator can display:
• all bundles on the system/adapter card or all bundles of a given type on the system by
specifying the value of type filter to be either mlppp or ima-grp
• bundle-specific information in summary (no detail option) or detailed format (detail
option specified) for one or more bundles
• protocol-specific information (for example, PPP or IMA) for the specified bundle
Parameters bundle-id — the multilink (PPP or IMA) bundle identifier. The command syntax must be
used as follows:
Syntax: bundle-type-slot/mda.bundle-num
bundle-ppp-slot/mda.bundle-num (a multilink PPP bundle)
bundle-ima-slot/mda.bundle-num (an IMA group bundle)
bundle: keyword
slot: MDA slot numbers
bundle-num: 1 to 32
ppp — displays PPP bundle information
ppp multiclass — displays multi-class MLPPP information
ima, ima-grp — displays IMA-type groups
mlppp — displays MLPPP-type groups
detail — provides detailed information
Output The following outputs are examples of multilink bundle information:
• Multilink Bundle (Output Example, Table 109)
• Multilink Bundle IMA Group (Output Example, Table 110)
• Multilink Bundle IMA Group Detailed (Output Example, Table 111)
• Multilink Bundle MLPPP (Output Example,
Table 112)
• Multilink Bundle Multi-class (Output Example, Table 112)
• Multilink Bundle MLPPP Detail (Output Example, Table 113)