Nomadix Access Gateways - Page 107

ACCESS GATEWAY
System Administration 95
1. Check the Subscriber Tracking Log option to enable or disable the Subscriber
tracking log. Note: NTP must be enabled on the NSE for Subscriber tracking log to be
enabled.
2. Enter the subscriber tracking log number in the
Subscriber Tracking Log Number
field. This is the syslog number to identify this syslog to your Server.
3. Enter the IP address of the Syslog server that is listening for the syslogs from your
NSE in the
Subscriber Tracking Log Server IP field.
PageFaults are stored in the file named “lograw.txt” in the /flash directory and is
not viewable on the web management interface.