ACCESS GATEWAY
114 System Administration
12. If required, check the box Enable Forget your Password to create a link that users can go
to (and is added to the passthrough list) so they can run a page at their ISP to get their
password.
13. If required, check the box Enable RADIUS Based WAN VLAN to allow the 802.1 q tag to
be in the users profile and acted upon.
14. Enable or disable the User Session Time Adjustment and credit functionality when the
NSE is down.
15. Enable charging for idle time to count idle time in the session time of Radius accounting
packets.
16. Enable RADIUS QoS Policies to assign a QoS policy to a user in their Radius Profile.
17. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset all the values to their previous state.
Defining the RADIUS Proxy Settings {RADIUS Proxy}
A RADIUS Proxy allows the NSE to relay authentication and accounting packets between the
parties performing the authentication process. Different realms can be set up to directly channel
RADIUS messages to the various RADIUS servers.
For additional RADIUS information, see also:
“Setting up Quality of Service {QoS}” on page 109
“Defining the Realm-Based Routing Settings {Realm-Based Routing}” on page 118
“RADIUS Attributes” on page 267
Changing the default tag number may result in a loss of connectivity.
To Next Page
Loading...
