ACCESS GATEWAY
System Administration 201
1. From the Web Management Interface, click on Subscriber Interface, then Subscriber
Buttons. The Subscriber Page -- Control Button Definitions screen appears:
2. Enter the definitions you want for each control button in the corresponding fields.
3. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset all the values to their previous state.
If you want to reset all field values to their default state, click on the
Revert button.
Defining Subscriber UI Labels {Subscriber Labels}
This procedure allows you to define how the user interface (UI) field labels are displayed to
subscribers.
Only the Login button should be named “Login.” Do not assign this name to
any other button.
To Next Page
Loading...
