Nomadix Access Gateways - Defining Subscriber Error Messages {Subscriber Errors

ACCESS GATEWAY
System Administration 203
Defining Subscriber Error Messages {Subscriber Errors}
This procedure allows you to define how error messages are displayed to subscribers.
1. From the Web Management Interface, click on Subscriber Interface, then Subscriber
Errors, 1 of 2. The Subscriber Page -- Error Message Definitions, 1 of 2 screen appears:
2. Enter the definitions you want for each error message in the corresponding fields.
3. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset all the values to their previous state.
There are 2 (two) pages of error messages available.